300Mbps Wireless Signal Booster Extender WiFi Repeater

Product Details This product can be shipped in blister packaging or boxed packaging. Please consult customer service for details Package contents: Repeater, power adapter plug, network cable, English manual, English packaging box Repeater function Relay Mode: Wireless to Wireless: The repeater receives the wireless signal from the original wireless router and then retransmits a new wireless signal, thereby achieving the effect of amplifying and extending the coverage range.Compatible with all wireless routers (requires knowledge of the wireless signal's username and password), very easy to set up.The product comes with an instruction manual.Mobile phones, computers, and tablets can all be set up; you only need to set it once and all wireless devices can use it. AP Mode: Wired to Wireless: A situation where you can directly access the internet without dialing a number after connecting a network cable to a repeater, such as in hotels, apartments, rental houses, offices, or when sharing broadband with a neighbor. You only need to plug the already connected network cable into the repeater's network port and set it up to convert wired connection to wireless use. Features: 1. Increase the coverage range of the wireless WLAN network 2. Wireless high-speed access to WLAN, wireless standard 802.11n 3. Backwards compatible with 802.11g and 802.11b standards 4. Supports 2.4GHz WLAN network 5. WLAN security, supports WPA2, WPA, and WEP (128/64) encryption 6. Simple setup wizard software interface 7.2T2R integrated built-in antenna Packing Information: Weight with packaging: 145g Packaging dimensions: 21.5*13.5*8cm Outer box dimensions: 56x37x38.5cm Quantity: 50 pcs Gross weight: 8kg Instructions for use: A: Configure the wireless repeater wirelessly 1: Plug the wireless repeater into the power outlet. 2: Click on the network connection icon in the bottom right corner of the computer screen.You will receive the wireless signal from the wireless repeater (WIFI-Repeater). Click the connect button to connect to the wireless repeater. 3: Open the IE browser, enter http://192.168.10.1 in the browser's address bar, and press the Enter key to enter the settings page. 4: In the set login interface, select the page language, then enter your account and password, and click the login button to log in.The default account and password are admin. 5: After logging in, you will see a page displaying the setup wizard; click on relay mode to proceed with the settings. 6: Select the wireless network you want to relay. 7: Enter the name and password of the relay network, click the confirm button, the wireless repeater will restart, wait for about 2 minutes, once the repeater has finished starting, reconnect to the repeater.(Relay network name: Wifi-Repeater) Note: The password must match the password of the wireless network you want to relay. B: Configure the wireless repeater using a wired connection 1: Plug the wireless repeater into the power outlet and connect the repeater to the computer using a network cable. C: Configure wireless AP mode 1: Plug the wireless repeater into the power outlet. 2: Open the IE browser, enter http://192.168.10.1 in the browser's address bar, and press enter Press to enter the settings page. 3: On the set login interface, select the page language, then enter your account and password, and click the login button to log in.The default account and password are admin. 4: Click on AP mode to make settings. 5: Make settings according to the displayed page information, (SSID: Name of the wireless network, Channel: Wireless channel of the wireless network, Encryption algorithm: Select the encryption method you want, Supported encryption methods include: WEP, WPA PSK, WPA2 PSK, WPA/WPA2 PSK, Password: Enter the wireless password you want to set. 6: Click the confirmation button, the wireless repeater will restart. Wait for about 2 minutes until the repeater has finished starting, then reconnect to the repeater. D: Computers, tablets, etc. are connected to the repeater 1: Start the computer, right-click on the network connection icon (or) open the wireless network connection interface. 2: Select the network of the wireless repeater you want to connect to from the list of wireless networks, click the connect icon and connect according to the Windows prompts. 3: After the connection is successful, you will see the network connection success icon in the bottom right corner of the computer. Change the account's login password: The default login password for the wireless repeater is admin. If you need to change the login password, first log in to the page 192.168.10.1, click on Management-Login Management, and enter the new username and password in the dialog box on the right. Click the confirm button, and the repeater will return to the login page, and the settings will take effect.