42V 2A Universal Lithium Battery Charger For 36V Hoverboard Self-Balancing Scooter 100-240V AC Power Supply Adapter

Product Description Please notice Compatible for Lithium Battery Li-ion Battery and the battery capacity is 36V NOT fit for Razor scooter and dirt bike NOT fits the model number: LBW11 scooter Usage Process 1.Check the voltage and connector of your battery2.Connect the charger to AC, the LED turns GREEN3.Connect DC output to BatteryLED turns RED mens fast charging4.LED turns GREEN from RED means the battery is fully charged5.Disconnect the charger from AC and battery If your scooter is not charging, it may be due to one of the following reasons: 1.The charger is not compatible with your scooter 2.Your battery is damaged due to the limited life of lithium batteriesIf your battery has been used for more than 12 months or has not been used for 2-3 months, your battery may be damaged 3.If the green light is on when you plug in the charger, but when you connect the scooter, the green light does not turn red and stays on, but the charger does not workThis is because the positive attitude nd negative +/- connectors of our charger do not match the positive and negative +/- connectors of your scooter and your scooter has no power, you can try to connect the charger to your scooter from a different connector 4.IfthegreenlightisonvgeniupluginthechargerButgoesoffvgeniuconnectthescooteritsbecausetheinternalshortcircuitofthescooterhascausedtheself-protectionfunctionofthechargertofileyoudbettercheckthescooterbatteryandreplaceit 5.Do not use for Lead Acid batteries WARNINGS To reduce the risk of injury, charge only 42V with the chargerDo not charge a non-rechargeable batteryDiğer pil türleri patlayabilir, kişisel yaralanma veya başka hasar neden olabilir • Do not disassemble the chargerHave it serviced or repaired by qualified service personnelIncorrect assembly can result in risk of electric shock or fire Never use the charger as a DC power source for any electrical equipment • Never operate a charger with a damaged device cord or plugInspect both input and output cords for any damage before using the charger • Never unplug a cord by pulling on the cord itselfAlways hold the plug when disconnecting the charger For indoor use onlyŞarj cihazını yağmura, kara veya aşırı neme maruz bırakmayın • Never charge a frozen battery • The battery must be placed in a well-ventilated area during charging • Do not use the charger while the equipment is operating Note: Check the maximum input amp rating of the batteryUsing a charger with an amp output that is too high may cause permanent damageinput rating of battery 42V Mini 3 Prong Charger Details